This page was generated from pandas1.ipynb.

Exercise 13 (read series)	Exercise 14 (operations on series)	Exercise 15 (inverse series)

Pandas

In the NumPy section we dealt with some arrays, whose columns had each a special meaning. For example, the column number 0 could contain values interpreted as years, and column 1 could contain a month, and so on. It is possible to handle the data this way, but in can be hard to remember, which column number corresponds to which variable. Especially, if you later remove some column from the array, then the numbering of the remaining columns changes. One solution to this is to give a descriptive name to each column. These column names stay fixed and attached to their corresponding columns, even if we remove some of the columns. In addition, the rows can be given names as well, these are called indices in Pandas.

The Pandas library is built on top of the NumPy library, and it provides a special kind of two dimensional data structure called DataFrame. The DataFrame allows to give names to the columns, so that one can access a column using its name in place of the index of the column.

First we will quickly go through a few examples to see what is possible with Pandas. You may need to check some details from the Pandas documentation in order to complete the exercises. We start by doing some standard imports:

import pandas as pd    # This is the standard way of importing the Pandas library
import numpy as np

Let’s import some weather data that is in text form in a csv (Commma Separated Values) file. The following call will fetch the data from the internet and convert it to a DataFrame:

wh = pd.read_csv("https://raw.githubusercontent.com/csmastersUH/data_analysis_with_python_2020/master/kumpula-weather-2017.csv")
wh.head()   # The head method prints the first 5 rows

	Year	m	d	Time	Time zone	Precipitation amount (mm)	Snow depth (cm)	Air temperature (degC)
0	2017	1	1	00:00	UTC	-1.0	-1.0	0.6
1	2017	1	2	00:00	UTC	4.4	-1.0	-3.9
2	2017	1	3	00:00	UTC	6.6	7.0	-6.5
3	2017	1	4	00:00	UTC	-1.0	13.0	-12.8
4	2017	1	5	00:00	UTC	-1.0	10.0	-17.8

We see that the DataFrame contains eight columns, three of which are actual measured variables. Now we can refer to a column by its name:

wh["Snow depth (cm)"].head()     # Using the tab key can help enter long column names

0    -1.0
1    -1.0
2     7.0
3    13.0
4    10.0
Name: Snow depth (cm), dtype: float64

There are several summary statistic methods that operate on a column or on all the columns. The next example computes the mean of the temperatures over all rows of the DataFrame:

wh["Air temperature (degC)"].mean()    # Mean temperature

6.5271232876712331

We can drop some columns from the DataFrame with the drop method:

wh.drop("Time zone", axis=1).head()    # Return a copy with one column removed, the original DataFrame stays intact

	Year	m	d	Time	Precipitation amount (mm)	Snow depth (cm)	Air temperature (degC)
0	2017	1	1	00:00	-1.0	-1.0	0.6
1	2017	1	2	00:00	4.4	-1.0	-3.9
2	2017	1	3	00:00	6.6	7.0	-6.5
3	2017	1	4	00:00	-1.0	13.0	-12.8
4	2017	1	5	00:00	-1.0	10.0	-17.8

wh.head()     # Original DataFrame is unchanged

	Year	m	d	Time	Time zone	Precipitation amount (mm)	Snow depth (cm)	Air temperature (degC)
0	2017	1	1	00:00	UTC	-1.0	-1.0	0.6
1	2017	1	2	00:00	UTC	4.4	-1.0	-3.9
2	2017	1	3	00:00	UTC	6.6	7.0	-6.5
3	2017	1	4	00:00	UTC	-1.0	13.0	-12.8
4	2017	1	5	00:00	UTC	-1.0	10.0	-17.8

In case you want to modify the original DataFrame, you can either assign the result to the original DataFrame, or use the inplace parameter of the drop method. Many of the modifying methods of the DataFrame have the inplace parameter.

Addition of a new column works like adding a new key-value pair to a dictionary:

wh["Rainy"] = wh["Precipitation amount (mm)"] > 5
wh.head()

	Year	m	d	Time	Time zone	Precipitation amount (mm)	Snow depth (cm)	Air temperature (degC)	Rainy
0	2017	1	1	00:00	UTC	-1.0	-1.0	0.6	False
1	2017	1	2	00:00	UTC	4.4	-1.0	-3.9	False
2	2017	1	3	00:00	UTC	6.6	7.0	-6.5	True
3	2017	1	4	00:00	UTC	-1.0	13.0	-12.8	False
4	2017	1	5	00:00	UTC	-1.0	10.0	-17.8	False

In the next sections we will systematically go through the DataFrame and its one-dimensional version: Series.

Creation and indexing of series

One can turn any one-dimensional iterable into a Series, which is a one-dimensional data structure:

s=pd.Series([1, 4, 5, 2, 5, 2])
s

0    1
1    4
2    5
3    2
4    5
5    2
dtype: int64

The data type of the elements in this Series is int64, integers representable in 64 bits.

We can also attach a name to this series:

s.name = "Grades"
s

0    1
1    4
2    5
3    2
4    5
5    2
Name: Grades, dtype: int64

The common attributes of the series are the name, dtype, and size:

print(f"Name: {s.name}, dtype: {s.dtype}, size: {s.size}")

Name: Grades, dtype: int64, size: 6

In addition to the values of the series, also the row indices were printed. All the accessing methods from NumPy arrays also work for the Series: indexing, slicing, masking and fancy indexing.

s[1]

4

s2=s[[0,5]]                    # Fancy indexing
print(s2)

0    1
5    2
Name: Grades, dtype: int64

t=s[-2:]                    # Slicing
t

4    5
5    2
Name: Grades, dtype: int64

Note that the indices stick to the corresponding values, they are not renumbered!

t[4]                        # t[0] would give an error

5

The values as a NumPy array are accessible via the values attribute:

s2.values

array([1, 2])

And the indices are available through the index attribute:

s2.index

Int64Index([0, 5], dtype='int64')

The index is not simply a NumPy array, but a data structure that allows fast access to the elements. The indices need not be integers, as the next example shows:

s3=pd.Series([1, 4, 5, 2, 5, 2], index=list("abcdef"))
s3

a    1
b    4
c    5
d    2
e    5
f    2
dtype: int64

s3.index

Index(['a', 'b', 'c', 'd', 'e', 'f'], dtype='object')

s3["b"]

4

Note a special case here: if the indices are not integers, then the last index of the slice is included in the result. This is contrary to slicing with integers!

s3["b":"e"]

b    4
c    5
d    2
e    5
dtype: int64

It is still possible to access the series using NumPy style implicit integer indices:

s3[1]

4

This can be confusing though. Consider the following series:

s4 = pd.Series(["Jack", "Jones", "James"], index=[1,2,3])
s4

1     Jack
2    Jones
3    James
dtype: object

What do you think s4[1] will print? For this ambiguity Pandas offers attributes loc and iloc. The attributes loc always uses the explicit index, while the attribute iloc always uses the implicit integer index:

print(s4.loc[1])
print(s4.iloc[1])

Jack
Jones

---

Exercise 13 (read series)

Write function read_series that reads input lines from the user and return a Series. Each line should contain first the index and then the corresponding value, separated by whitespace. The index and values are strings (in this case dtype is object). An empty line signals the end of Series. Malformed input should cause an exception. An input line is malformed, if it is non-empty and, when split at whitespace, does not result in two parts.

Test your function from the main function.

---

Exercise 14 (operations on series)

Write function create_series that gets two lists of numbers as parameters. Both lists should have length 3. The function should first create two Series, s1 and s2. The first series should have values from the first parameter list and have corresponding indices a, b, and c. The second series should get its values from the second parameter list and have again the corresponding indices a, b, and c. The function should return the pair of these Series.

Then, write a function modify_series that gets two Series as parameters. It should add to the first Series s1 a new value with index d. The new value should be the same as the value in Series s2 with index b. Then delete the element from s2 that has index b. Now the first Series should have four values, while the second list has only two values. Adding a new element to a Series can be achieved by assignment, like with dictionaries. Deletion of an element from a Series can be done with the del statement.

Test these functions from the main function. Try adding together the Series returned by the modify_series function. The operations on Series use the indices to keep the element-wise operations aligned. If for some index the operation could not be performed, the resulting value will be NaN (Not A Number).

---

---

Exercise 15 (inverse series)

Write function inverse_series that get a Series as a parameter and returns a new series, whose indices and values have swapped roles. Test your function from the main function.

What happens if some value appears multiple times in the original Series? What happens if you use this value to index the resulting Series?

---

One may notice that there are similarities between Python’s dictionaries and Pandas’ Series, both can be thought to access values using keys. The difference is that Series requires that the indices have all the same type, and similarly, all the values have the same type. This restriction allows creation of fast data structures.

As a mark of the similaries between these two data structures, Pandas allows creation of a Series object from a dictionary:

d = { 2001 : "Bush", 2005: "Bush", 2009: "Obama", 2013: "Obama", 2017 : "Trump"}
s4 = pd.Series(d, name="Presidents")
s4

2001     Bush
2005     Bush
2009    Obama
2013    Obama
2017    Trump
Name: Presidents, dtype: object

Summary (week 3)

• You found that comparisons are also vectorized operations, and that the result of a comparison can be used to mask (i.e. restrict) further operations on arrays
• You can select a list of columns using fancy indexing
• An application of NumPy arrays: basic linear algebra operations and solving systems of linear equations
• You know the building blocks of matplotlib’s figures. You can create figures based on NumPy arrays and you can adjust the attributes of figures
• You understand how (raster) images are organized as NumPy arrays. You can manipulate images using Numpy’s array operations.
• In Pandas it is standard to use rows of DataFrames as samples and columns as variables
• Both rows and columns of Pandas DataFrames can have names, i.e. indices
  • Operations maintain these indices even when adding or removing rows or columns
  • Indices also allow several operations to be combined meaningfully and easily

Official enrolment on the course

After completing the first three weeks of TMC assignments, you may now officially enrol on the course through the Open University. Course registration is possible until April 8, 2021.

Course materials are available to everyone, but Open University course enrolment is required for the following:

• PROJECT WORK and EXAM - Access to the Moodle learning environment, where project work and the exam are completed. Project work and exam are required for course completion.
• COMMUNICATION – Access to other University of Helsinki platforms which form more structured discussion channels, to complement Telegram discussions.
• CREDITS - To be able to receive credits for the course (5 ECTS) once the course is successfully completed.

Follow the instructions below to enrol on the course:

1. Enroll on the course through Open University: https://www.avoin.helsinki.fi/palvelut/esittely.aspx?o=135221588
2. You will receive the Moodle-link and the course key through email within 24 hours after course enrollment.
3. Do you study at University of Helsinki or another HAKA member institution?

• If yes, use your HAKA username and password to log in to Moodle. You do not need to activate the University of Helsinki user ID.
• If no, please activate your University of Helsinki user ID to access Moodle. You will receive more information on the user ID after registration through email.

4. If you are a student at the University of Helsinki: Add your University of Helsinki student number to your TMC account!